Відео

You can’t strip with a power tool if you UNSCREW

Nice product, thanks for showing this to us!

The strange thing about CO detectors is whether it should be at the ceiling or knee height is debatable. CO is lighter than oxygen but mixes with the air & can be at different levels in a room. Some companies say have CO detectors at knee height or roughly the height of your head when sleeping. I think both areas make sense given its properties.

I don't like the skipping. I can easily fast forward over things I don't care about, but it is very difficult to pause the video on the things you skip over. Some things you skip I want to look at further. Keep up the good work and thanks for the video.

Great I needed this to compare to a Thor by Astra but at this price point it needs t last one time and be able to work instead of Breaker bar

Never saw where you opened the low side switch on the connector. How did the Freon go into the system?

Thanks for the explanation.. seems like this is the best compare to all the other average mid range scanner.. 👏🏻❤👍🏻

The so-called "leaked" flyers do one thing that's important. They give a heads up on upcoming discount sales. So people may hold off on buying certain things and waiting for the sales.

Since cable winch pullers are both haulmaster... it's probably a typo... it is probably a 4ton & not 4000 lb winch... If you actually check the specifications the cheaper has 3/16" cable & weighs like 7 lbs... the more expensive is 1/4" cabke & weighs 14+ lbs... they definitely are not the same... maybe the 2 ton is the typo?...

Sure I have a question for you what bearing installing an uninstalling races and bearings what tool would you buy I'm not making a living with it I just want it for my shop maybe two or three times

Bauer is great for small jobs around my yard.

I would buy an Ego for the extra battery to go with my 2 weed Wackers.

Thanks again for a ‘’true review’’👍🏻🇺🇸

Hi does it have the Power Balance option?

How's it going man, I have two questions about my 96 Dodge ram, it's only the 3.9 V6 with a utility bed, so stock it weighs close to 5500 lb if that has any tie into anything I'm going to say, but for one my brake fluid seems to be running through extremely quick, would there be any issues I should look out for or is that just because it's stopping such a heavy vehicle. Second question would be any advice for getting the engine to quiet down? It's been driving like a champ for 2 years, but runs super loud especially in idle

My tower fan stopped working it won’t turn on yes it needs to be cleaned however it was working for 3 straight years without being cleaned and it just turned off not sure what the issue is?

So!! Can it do violinstrings? ThNks very much!

I was going to buy a new pressure washer. Thank you, i just ordered a GFI and will be washing the driveway on Saturday.

I have one we bought in 1985

Yeah I paid 99. For the jack , I needed it right away or I would have waited to get it on sale. They got me a couple times but I ended up getting most of my Bauer stuff on sale and my Hercules tools also. Wait til you get a free tool with the purchase of a battery and charger.

Wow! I have the exact same mower. ALSO as luck would have it I too was given another one identical last week that I haven’t checked out yet but I do know when you pull the starter rope it sounds like it rubs/grinds and won’t start. This mower is sorta hard to find videos for and yours is FANTASTIC! We all thank you a lot!!!!!👌👌👌😁😁😁

Will this scanner allow you to do a camshaft position sensor RELEARN procedure on a jeep jk?

Sounds neat! Perfect for roadtrips Is 200 watts enough for a laptop?

Thank you for this video! Anyone who is new to Harbor Freight will need help trying to understand how the coupons work. Sincere thanks

Question what type of oil do you use with the truck having around 100,000 miles you said , are you still using conventional or have you switched to synthetic?

Where’s the fuel filter located?

Its illegal to buy or sell Freon in Washington State!!

Great review 👍🏻🇺🇸

Well what the heck did you put over the hole on the floor? You skipped a whole step.

If any one aspects lifetime warranty on files. They are smoking some things they just like a grinder dics they are consumable but they are like every thing else if you take care of them . They will last and if you only get a couple of jobs Done with them .they pd for them self.

Yes harbor freight prices has started jacking their prices some. But for one thing they have started bringing up the quality of their. . Stuff plus good warranty that easy to get replacement .also you have to look at the tool prices at the big box. Store.

Umm holy shit.. I was looking for a basic tutorial video and the understanding I left with makes me want to restore/ rebuild floor jacks! Best floor jack tutorial! 🙏🏽

Great video!! Thanks

Rechargeable batteries go bad all the time.

🎉 I have one of these bench vises exactly like the one you have and I have abused used and tortured it to hell and back and it hasn't failed me yet going on 5 years now and I regularly use hammers on the anvil and play a cheater bar on it and no problems really good bench vise for a very good price more than adequate for daily use or homeowner use too

Yes but there not available on the link anymore. I’ve purchased some of these ligjts 2 years ago and they are still working. The name Jesled is a good brand. I dont have the one with a remote, maybe i have their first model.

Remember the pre-pandemic days when Lowe’s and Home Depot used to do the two 20lb. bags for $9.99 on the 4th of July and Memorial Day? *sigh*

Those charcoal bags used to be 20lb bags for the same price. Busted economy

Gas grills don’t give any flavor. Add a compact metal charcoal box to a gas grill to help.

I just fixed my tb360 by lubricating the cable. Thank you.

I totally agree - spray paint prices nowadays are through the roof! Thank you for mentioning the ryobi pressure washer video you did 5 years ago on the gfci plug being faulty. That was the same issue with mine as well. I will have to research where I can get a replacement, so I can use it again. ua-cam.com/video/1cM1yG90x9A/v-deo.html Thanks again for sharing these savings with us!

I got that free Ryobi 3/8 ratchet you showed us as a better deal than the one that has multi drive size ratchet for 119. I think the one for 119 is a way better deal because you would have to buy 3 ratchets at 99 each to do everything the one for 20 dollars more can do, because of you need a1/2 drive ratchet you just change that part of the tool to 1/2 in drive, if you need to run a 1/4 drive socket you just use the 1/4 In drive

Lets go over the Home Depot 4th of July Sale deals and see what is available PLUS after I cover the flyer I will show you some EXTRA savings BOGO deals that the Home Depot doesn't Advertise. For Extra savings stick around for the last part of the video.

I don't see coupons in the store any more !

I have the MUCAR v07s and the interface looks very similar with a different color (red vs blue), even the modules features are the same, which makes me wonder if the modules are interchangeable between this ancel and the mucar

I am an old customer of HF, but in the past years I found that the price of many goods at HF has increased a lot, which make it less attractive for some customers when comparing the brand name, quality, functions and durability of products like power hand tools, etc.

Great video! Appreciate the effort put into this concise and easy tutorial. Doing a coworkers brakes shortly with this car and wanted to know roughly what was in store. This is a very basic and easy to service setup, especially with the ease of returning the piston to fully open for the brake caliper. My VW is frustrating as it requires turning it to reset it whereas this is just a pressure system. Again, thanks!

Cool. I have the XTool A30D on a tablet and it works great. All modules and actuation tests, plus It also records data for later graphing and diagnostic review which super handy (also way safer than trying to read data while driving).

How do you adjust the chain on this thing? It pops off every time I run it for more than five seconds, and I can’t find any way to tighten it.

Cen you read real miels on car.